To access the Virtual Devices page:
Navigate to Devices.
Click Device Batch Update.
Select Virtual Devices from the left side menu.
Initially, devices might not appear as PseudoDevices until assigned specifically.
To mark devices as PseudoDevices:
Navigate to Device Batch Update, select the intended folders.
Open the properties panel; choose "True" under "Is Pseudo Device".
Note: Pseudo Devices will not appear in the main device list or be usable in FDD or BI functions. They exist only for point extraction.
Until now, to identify pseudo devices, we added a tag. From this update, we will manage pseudo devices by adding a dedicated type.
Click Create New Device
Enter device name (required)
Optionally assign type, area, and location
Click Add Another Device to bulk-create multiple
Set common type and area using dropdowns in the table header
Click Save – devices will appear in the list
Select points from a Pseudo Device
Drag them to the Create New Virtual Device section
Fill in required details in the popup and click Save
Click on a Pseudo Device
Show all its points
Use the Organize Points By option:
By Subfolders: Groups based on folder hierarchy (e.g., VAV1, VAV2)
By Point Name: Groups based on point naming patterns (e.g., Lighting_Zone1, Lighting_Zone2)
Select the resulting groups
Drag and drop them to the Create New Device section
One Virtual Device is created per group
Group name = Device name (editable in the popup)
Filter Virtual Devices by Pseudo Device: After selecting a Pseudo Device, use the filter chip “Created from {pseudoDeviceName}” to view all Virtual Devices created from it.
Locate Source Device: From a Virtual Device, click Locate Device to highlight its originating Pseudo Device on the left.