Linked Devices

Linked Devices

To link devices that you have discovered in KODE OS and added in myMSI as well, follow the below instructions:

  • Click on Devices at the site you need to link devices

  • Go to Batch Update Devices button places on the top right corner

  • Click on Linked Devices





You will be directed to the linked devices page from where you will see the list of all linked devices as well as the option to link new ones by clicking on the “Link Devices” button at the top right hand corner of the page:



New Device Linking Page is divided into three main section:

  1. Discovered Devices (devices already in KODE OS)

  2. Linked Devices

  3. myMSI Devices



Clicking on the checkboxes on each of the sections, left section (KODE OS) and right section (myMSI), devices will be added in the middle section (Link Devices). To finish the linking click on the Link button at the Link Devices section.



If you want to link all devices available click on the “Auto Suggest” button at the right hand corner of the screen. From the Apply Filters page you can filter the devices by Type and Area. Click “Apply” and you will be redirected to the Auto Suggest Linked Devices page. The devices here will be matched by their names:





Now click on the “Link” button and you have linked the devices which will appear once entering the Device Linking Page.

myMSI Devices 

To access the assigned project on the myMSI site, navigate to the Site's search from the left side bar. Look for the specific site by entering the project details. Once located, proceed to the "Devices" section. In this section, see the "Linked Devices" column, where each device link is listed. Click on the device links to open them on KODE OS:







    • Related Articles

    • Devices

      To access Devices just click on devices on the left pane after you selected the desired building. Here you can see a list with all devices that are available in the selected building. You can perform a search to narrow the list to desired devices or ...

    • Navigating to Device Details - Mobile App

      Device Details helps you to determine device performance, status, history and allows you to interact with devices in order to adjust their functioning with the aim of increasing optimum performance. There are a few ways on how you can get to device ...

    • Devices - Batch Update

      The purpose of tagging is to correctly assign the appropriate components to each piece of equipment. Follow the below steps to tag your devices. Navigate to a building of your choice through the Sites feature in the left navigation bar. Click on ...

    • Virtual Devices

      We use Virtual Devices to separate grouped systems and devices. Virtual Devices can divide a single device into multiple parts for better use. Note: Devices should be tagged with PseudoDevices in order to be part of the Virtual Devices. How to tag a ...

    • Navigating to Systems - Mobile App

      In order to obtain a visual representation of device placement throughout major systems and interact with the devices directly, you can rely on the Systems module. Navigate to the building of your choice and select Systems on the Building Menu. A ...