FDD Batch Configuration
The goal of FDD configuration is to establish monitoring and alarms on any of the integrated pieces of equipment to determine a system fault. Follow the below steps to configure FDDs of your choice.
Go to KDOE OS and select a site.
Navigate to the FDD module through the main left navigation bar.
Click on the three dots icon at the top right corner of the FDD page.
From the drop down menu select the Configs.
Select the Routines you would like to enable from the list.
Click on the Configure button at the bottom right of the page, select a Policy and then click Configure.
This will run a job in the background to find all the matches based on the integrated devices and data models that you have in your building.
This will put the routines in the Disabled state vs the Not Configured state.
You can click through each one of the routines from the list and make adjustments.
The routine configuration page will open up from where you can select the devices you want to be part of FDD.
On the right section, the Routine Params section you can customize the parameters to your liking. Even though the parameters are chosen while configuring the actual routine they can be changed based on users’ preferences.
You can also adjust the notification settings, add external data source, enable the routine and adjust base settings.
Once you have the configuration settled click on Configure and you’re good to go!
Related Articles
FDD User Manual
Understanding Fault Detection & Diagnostics What is a Fault? A fault is a period of time in which a specified condition is true on a specific device. For example, this is a fault: @8:00am AHU-1 Could not maintain discharge temperature within setpoint ...Points - Batch Update
This feature is used to tag your points in groups and make points update more easier. Point-Batch Updating can be found at three dots in the top right corner. When clicking on “Point - Batch Update” a list of points will show where you may select the ...FDD on Mobile App
Introduction Fault Detection and Diagnostics (FDD) is a proactive approach for identifying and analyzing system failures or faults within a building's infrastructure at their earliest stages. Navigate through FDD Log into the Mobile App and you’ll ...Managing Notification Policies
Creating a policy In the context of FDD, a policy refers to the establishment of notification preferences. The policy determines the communication method, the message, the recipient group, and escalation patterns. To create a policy, follow these ...Devices - Batch Update
The purpose of tagging is to correctly assign the appropriate components to each piece of equipment. Follow the below steps to tag your devices. Navigate to a building of your choice through the Sites feature in the left navigation bar Click on ...